Switching sockets can cause eleven hidden dangers

2022-07-22
  • Detail

It is easy to cause fire in dry seasons in autumn and winter, and fire prevention has become the theme of that season. How to prevent fire for the switches often used in daily life? Please see the following 11 key points

it is easy to cause fires in dry seasons in autumn and winter, and fire prevention has become the theme of that season. How to prevent fire for the switches often used in daily life? Please see the following 11 key points

tcl switch Siemens switch

1. The socket in the toilet should be installed with a splash box to avoid water splashing, such as forming a circuit breaker

2. The socket is pressed by inflammables or dust falls into it, causing a short circuit, or it is installed in a flammable and explosive dangerous place, and sparks are generated when inserting or unplugging the plug, causing explosion and fire

3. If the plug is damaged and not replaced in time, use bare wire head instead of the plug, resulting in short circuit or spark, causing combustible fire

4. Some bedside switches are placed after use, and the switch hits the bedstead or wall, causing damage to the external insulation layer, which is very likely to cause a short circuit

5. The working voltage and current of the lamp holder are inconsistent with the power of the socket used. If the temperature is too high, it will cause a fire. The sockets of Sanxiong aurora are all 16A super current limiting, which can meet the normal power consumption of all industries and families. Some other switches are generally 10A current limiting. When the household uses a little more power, it will cause a fire

6. Insulation stripping of wire ends for paperback or screw lamp holders or multi socket outlets. If it is too long, the exposed part will cause short circuit; If it is too short, the conductor is in poor contact, and the contact resistance is too large and overheated, resulting in fire

7. During the installation of the lamp holder, turn the lamp holder to make the wires twisted together, or there are too many exposed cores, which touch the other end after being scattered, resulting in short circuit and fire

8. The switch is improperly installed, especially when the switch is installed on a combustible object. The sheath at the lead out of the wire is scratched, exposing the wire core or water vapor infiltration, causing a short circuit, or an arc when the switch is disconnected, causing a fire

9. The distribution board is not in the box, and when the fuse is blown, hot metal particles will splash down, causing the combustibles below to burn

10. When the combustible gas for domestic use is mixed with air and reaches the explosion limit due to the leakage of pipes or valves, opening and closing the electrical switch without arc suppression device will produce sparks and cause fire or explosion. Sanxiong Aurora switch adopts silver nickel alloy contact and sliding rocker type, which not only avoids the generation of arc, but also greatly extends the service life of the switch panel. It is suggested to buy silver nickel alloy contacts instead of pure silver and aluminum alloys. They have low melting points and are easy to melt, making it easier to produce electric arcs

11. The cross-section of the power cord used for the chandelier is small and the use power is too large, which makes the conductor hot and fire

link: the most important safety wire switch purchase three points

杭州结石医院

上海精神医院

广州男科医院

Copyright © 2011 JIN SHI