How to identify whether the decoration manual qual

2022-07-22
  • Detail

In addition to identifying the overall effect of decoration, the acceptance mainly depends on whether the manual quality of decoration is qualified. Acceptance can be identified from the following aspects

(1) the laying of lighting circuits should comply with the regulations, sockets, lamp switches, master switches, leakage switches, etc. should have a certain height, kitchens and air conditioners should be laid in special lines, and TV antennas and telephone special lines should be installed in positions convenient for maintenance. If the decoration manual quality is unqualified, in the future life, you will find that the places you don't care about at all are the most troublesome places for you now

(2) the drainage shall be smooth without leakage, backflow and ponding, and the high-grade water parts shall be free of clamp marks and scratches. If the finishing quality is unqualified, no matter how beautiful your bathroom is decorated, there will always be a dirty ground and a pool of deteriorated water

(3) the newly built wall should be vertical, the horizontal plane of the brick body should be consistent, the joints should be uniform and neat, the brick joints should not exceed 1mm, and the overall error of the ceramic tile should not exceed 0.8cm. If you don't want to live in a home with a sense of inclined space, please carefully check whether the handmade quality is qualified

(4) the overall production error of Plane Ceiling shall not exceed 0.5, and the gap between plates shall not exceed 0.3mm; The error of plastic ceiling shall not exceed 0.5mm

(5) the seam of wood sealing line, corner line and waist line decorative panel shall not exceed 0.2mm, the seam of line and line clip shall not exceed 0.3mm, the seam of decorative panel and plate shall not exceed 0.2mm, and the overall error of sliding door shall not exceed 0.3mm

(6) the paint should be smooth, with good hand feel, no sweep marks and cracks, and no color difference and nail holes within one meter

(7) the wall surface is flat and straight, and there is no obvious bulge and color difference within one meter. It is used for touching and wiping without throwing ash. The construction quality is related to the quality of the construction team; It is also related to the unit price of the construction project. The best way is to sign a contract with both parties before the construction starts to clarify the decoration requirements and acceptance standards. If the decoration manual quality is unqualified during acceptance, there is also evidence to rely on

after the decoration manual quality is qualified, the customer, designer, project supervisor and construction person in charge shall participate, and sign on the quality report after passing the acceptance

天津精神医院

淄博男科医院

济南癫痫医院

Copyright © 2011 JIN SHI